Madri, Udaipur, Rajasthan
- GST NO. : 08AABCP2186Q1ZU
Conventional Fire Alarm System
Leading Manufacturers, Exporters and Wholesaler of Auto Dialer Alarm Fire Panel, Heat Sensor, Manual Call Point, Response Indicator, Smoke Detector, Smoke Sensor and Sounder Cum Strobe from Udaipur.
| Business Type | Manufacturer, Exporter, Supplier |
| Type | Auto Dialer Alarm Fire Panel |
| Country of Origin | India |
| AC Power | AC220V±10% 50Hz, 2.0 Amps. |
| Using environment Temperature | 0°C~50°C Related Humidity= 95% (40±2°C) |
| Fire & Fault Contact Outputs | 1.0 amps DC24V or AC125V |
| Standby Current | 65mA @ DC24V |
| Zone Capacity | Can Be Connected with 30 Fire Detectors and Infinite Manual Call Points |
| Dimension (L x W x H) | 265×335×87 mm |
| Battery | Maintenance Free Dry Batteries, Max. Charger Capacity- 4ah Battery |
| Total 24 V System Power | 3.0 amps |
Preferred Buyer From
| Location | Worldwide |
Conventional Fire Alarm Control Panel is a 24volt, 2 or 4 zones, Class B, Conventional Fire Alarm Control Panel. It is designed exclusively to meet the latest market requirements and microprocessor technology, with stand-by batteries. It has functions of operation indication, fault indication, alarm indication, and cable checking for short circuits or broken circuit.
Features- One set each of volt free changeover contacts operable on fire and fault.
- Class change input for remote control.
- Zone and alarm disablement.
- 28V 125mA fused supply permanently available.
- 28V 300mA fused supply available for fire alarm bells or sounders.
- Passive repeater available.
| Business Type | Manufacturer, Exporter, Supplier |
| Color | White |
| Power Source | Electric |
| Feature | Light Weight, Waterproof |
| Type | Heat Sensor |
| Country of Origin | India |
| Output | NC/NO(Optional), Buzzer (Optional), Pulse |
| Weight (Gram) | 245gm (Stand Alone), 167gm (Conventional) |
| Operating Voltage | +9VDC Battery (Stand Alone), +12VDC/ +24VDC/ +48VDC (Conventional) |
| Operating Current | 9mA (Stand Alone), (2 wire) Alarm Current 19.2 mA@ 48VDC (Conventional) |
| Working Temprature | -10°C ~ 60°C |
| Alarm Mode | Network Alarm Signal (for Conventional) |
| Dimension | 45(H)x104(D)mm (Stand Alone), 51(H)x104(D)mm (Conventional) |
| Range | 2 Detecting 20M |
| Working Humidity (RH) | ≤95% RH |
Preferred Buyer From
| Location | Worldwide |
Our Heat Sensors for alarm system, with temperature sensing signal processing technique, stable operation, easy installment, and flexible output mode for adapting various alarm control panels. This product is widely used in houses, hotels, schools storage, etc.
Features- Excellent performance, low power exhaust, and infrared photoelectric diode
- SMT Design / High stability
- 2 Wire Detector (Pulse/Buzzer Output)
- 4 Wire Detector [Relay Output (NC/NO)
- Easy Installation
- Manual test function / Power Indication LED
- Easy Maintenance
| Business Type | Manufacturer, Exporter, Supplier |
| Color | Red |
| Automation Grade | Manual |
| Power Source | Electric |
| Country of Origin | India |
| Current Voltage | Consumption (150μA/ 60mA@ 24 VDC) |
| Weight (Gram) | 475gm |
| Operating Voltage | 24V DC |
| Application | Temp Range (0° C to + 60° C) |
| Working Humidity (RH) | 5 to 95% Relative Humidity (non condensing) |
| Housing material | CRCA Sheet-1.6 mm thick |
| Dimension (L x W x H) | 120X95X58 mm |
Preferred Buyer From
| Location | Worldwide |
Temperature sensing signal processing technique. The Manual Call Point is tough, durable, and highly visible. An alarm LED is provided inside the call point to indicate the alarm condition. There is transparent glass protecting the MCP from the front side. A small MS powder-coated hammer is attached with the MCP, This is used to break the front glass to generate an alarm in the system. All the MCP comes with a factory-fitted back box for Surface or Semi-flush mounting on the wall.
Features- Compatibility with any conventional fire Alarm System
- Wall mount facility
- Suitable for malls, restaurants, residential, etc.
- Duel LED on the front
- Steady RED LED at fire condition
- Green LED blinking at normal condition (optional)
| Business Type | Manufacturer, Exporter, Supplier |
| Material | Plastic |
| Color | White |
| Power Source | Electric |
| Feature | Durable, Heat Resistant, High Accuracy |
| Type | Response Indicator |
| Country of Origin | India |
Preferred Buyer From
| Location | Worldwide |
Response Indicators are connected to automatic fire detectors in order to indicate quickly the source of an alarm signal from detectors that are not easily accessible or visible. The Response Indicators contain two LEDs to indicate Fire.
Features- Compatibility with all Detectors
- Dual LED Lamp
- ABS Plastic
- Indoor use Only
| Business Type | Manufacturer, Exporter, Supplier |
| Country of Origin | India |
| Operating Voltage | +12 V DC / +24 V DC /+48 V DC (Anyone) |
| Operating Current | Static Current = 3 mA ; Alarm Current = 55 mA |
| Detecting Range | 20 M2 |
| Working Temprature | -10°C ~ 60°C |
| Alarm Mode | Network Alarm Signal |
| Output | NC / NO (Optional), Buzzer (Optional), Pulse Output |
| Mounting | Ceiling Mounted |
| Housing Material | Plastic |
| Dimension (L x W x H) | 99.80(D)X49(H)mm (With Base) |
Preferred Buyer From
| Location | Worldwide |
It is an intelligent smoke detector, which can be configured with an Addressable Fire Alarm Control Panel. Each point (device) can be given a specific ID, which allows the panel to continuously monitor a specific detector location (point). It reduces the maintenance cost and makes it easier to maintain the system.
Features
- Addressable-analog communication
- Low standby current for continuous monitoring ( > 2.5mA)
- Two-wire connection
- Two LEDs (RED), blinks in normal condition and becomes stationary during the fire
- Remote test from Panel
| Business Type | Manufacturer, Exporter, Supplier |
| Material | Plastic |
| Color | White |
| Automatic Grade | Automatic |
| Power Source | Electric |
| Application | Smoke Detecting |
| Feature | Heat Resistance |
| Type | Smoke Detectors |
| Country of Origin | India |
| Output | NC/NO(Optional), Buzzer(Optional), Pulse Output |
| Weight (Gram) | 177gm (Conventional), 255gm (Stand Alone) |
| Operating Voltage | +9VDC Battery for Stand Alone (Stand Alone), +12VDC / +24VDC/ +48VDC (Conventional) |
| Operating Current | (2 wire) Alarm Current 10 mA @ 48 VDC (Conventional), (4 wire) Alarm Current 70 mA @ 48 VDC |
| Working Temprature | -10°C ~ 60 ° C |
| Alarm Mode | Network Alarm Signal (for Conventional) |
| Dimension | 51(H)x104(D)mm (Conventional), 37(H)x104(D)mm (Stand Alone) |
| Range | 20M² Detecting |
| Working Humidity (RH) | <95% RH |
| Mounting | Ceiling |
| Housing material | Plastic |
Preferred Buyer From
| Location | Worldwide |
Our Smoke Sensors are for fire alarm systems, with photoelectric signal processing technique, stable operation, easy installment, and flexible output mode for adapting various alarm control panels. This product is widely used in houses, hotels, schools storage, etc.
Features- Photoelectric signal processing technique
- Excellent performance, low power exhaust and infrared photoelectric diode
- SMT Design / High stability
- 2 Wire Detector (Pulse/Buzzer Output)
- 4 Wire Detector [Relay Output (NC/NO)
- Easy Installation
- Manual test function / Power Indication LED
- Easy Maintenance
| Business Type | Manufacturer, Exporter, Supplier |
| Material | Plastic |
| Color | Red |
| Power Source | DC/Battery |
| Feature | Durable, High Accuracy, High Volume |
| Country of Origin | India |
| Alarm Type | Sounder Cum Strobe |
| Usage/Application | Fire |
Preferred Buyer From
| Location | Worldwide |
