Madri, Udaipur, Rajasthan
- GST NO. : 08AABCP2186Q1ZU
Addressable Fire Alarm System
Leading Manufacturers, Exporters and Wholesaler of Addressable Input Module, Addressable Supervisory Module, Gas Detector, Heat Detector and Relay Module from Udaipur.
| Business Type | Manufacturer, Exporter, Supplier |
| Country of Origin | India |
| Current Consumption Standby | 0.6mA, Alarm: 1.0mA |
| Input Voltage | 24 VDC [16V to 28V] |
| Dimension / LWH | 108 mm x 86 mm x 38 mm |
| Humidity | 0 to 95% Relative Humidity, Non condensing |
| Indicator Status | Normal: Single blink / Active: Steady / Fault: Double Blink |
| Ingress Protection Rating | IP30 |
| Input Relay | Normally Open dry contact |
| Input Resistance | 5.1Kohms / ¼ W |
| Material / Colour | ABS / White Glossy finishing |
| Operating Temperature | -10°C to +50°C |
| Protocol / Addressing | Private, Value range from 1 to 254 |
| Weight | 155g (with Base), 85g (without Base) |
Preferred Buyer From
| Location | Worldwide |
The PY-IM-101-A Addressable Input Module is used to acknowledge normally open monitor signals from interface equipment and then send a communication signal to the control panel, ideally for monitoring sprinkler system, pressure switch, position switch, signal valves, and other third party equipment such as conventional panel.
The unit is manufactured based on the requirement of EN 54 part 18, European Standard. The unit is aesthetically pleasing with an unobtrusive design that will complement modern building designs and its plug-in type assembles make installation and maintenance more convenient to the installer. The unit incorporates an intelligent processor that provides automatic monitoring for both open and short circuits of the input signal line. The PY-IM-101-A Input Module is compatible with the PY-CP-4A Analogue Intelligent Fire Alarm Control Panel, produced by single manufacturer PEPL, to avoid addressable communication compatibility problems.
Features- Loop powered device
- LED status indicator
- Input cable monitored
- Normally open configuration
- Aesthetically pleasing design
- Fire or Supervisory signal configuration
- Built-in MCU processor and digital addressing
- Surface mounting with fix base for simple installation
| Business Type | Manufacturer, Exporter, Supplier |
| Type | Addressable Supervisory Module |
| Country of Origin | India |
| Aux Output | ≤ 200 mA @ 24V DC |
| Protection Level | < 200 mA @ 24V DC |
| Supervisory Contact | Dry Relay |
| Operating Voltage | 18V~28V DC |
| Working Temprature | -10°C~50°C |
| Standby Current | ≤ 5mA |
| Dimension (L x W x H) | 111.39X90.48x40.48 mm |
Preferred Buyer From
| Location | Worldwide |
It is an intelligent addressable supervisory module, which can be configured with an Addressable Fire Alarm Control Panel. Each point (devices) can be given a specific ID or individual address, which allows the panel to continuously monitor a specific location (point). The module has two panel-controlled LED indicators. supervisory modules continuously monitor the supervisory devices like control valves, zone valves, etc.
Features- Addressable-analog communication
- Two-wire connection
- Two LEDs one is Green, which blinks in normal conditions and another one is Red which becomes steady during a fire alarm conditions.
- Remote test from Panel
| Business Type | Manufacturer, Exporter, Supplier |
| Type | Gas Detector |
| Country of Origin | India |
| Alarm Current | ≤ 20 mA @ 24VDC |
| Operating Humidity Range | ≤95% RH |
| Operating Voltage | 9V~28V DC Non-Polarized |
| Working Temprature | -10°C~+50°C |
| Working Humidity (RH) | ≤95% RH |
| Standby Current | ≤18 mA @ 24VDC |
| Dimension (L x W x H) | 99.8(D)X48.2(H) mm |
Preferred Buyer From
| Location | Worldwide |
PyrotechPY-LPG-841-CgasdetectorisdesignedForsinglestationuseorforconnectingto a firealarmorsecurityalarm system panel. It is intended to detect leakage of natural gas, town gas, bottled gas, coal gas, or carbonmonoxide.Thegasdetectorcanbemountedhighorlow.
Features
- Detect all sorts of gases.
- Easy to install.
- Loud 80dB alarm and LED warning light.
- High quality durable sensor.
- Excellent reliability & High stability.
| Business Type | Manufacturer, Exporter, Supplier |
| Country of Origin | India |
| Alarm Current | ≤ 3 mA |
| Rate-of-rise-alarm | 7.1°C/5S |
| Operating Voltage | 18V~28V DC |
| Working Temprature | -10°C~50°C |
| Standby Current | ≤ 2.5mA |
| Dimension (L x W x H) | 99.80(D)X49(H)mm (With Base) |
Preferred Buyer From
| Location | Worldwide |
It is an intelligent rate of rising heat detector, which can be configured with an Addressable Fire Alarm Control Panel. Each point (device) can be given a specific ID, which allows the panel to continuously monitor a specific detector location (point). It reduces the maintenance cost and makes it easier to maintain the system.
Features- Addressable-analog communication
- Rate-of-rise feature activates when the ambient temperature increases at the rate of 7.1 °C/5S
- Low Standby current
- Two LEDs (RED), blink in normal conditions and become stationary during a fire alarm condition.
- Remote test from Panel
| Business Type | Manufacturer, Exporter, Supplier |
| Color | Red |
| Type | Relay Modules |
| Country of Origin | India |
| Alarm Current | ≤ 25 mA |
| Protection Level | IP 30 |
| Relay Capacity | 2A@24V DC & 1A@250V AC |
| Operating Voltage | 18V~28V DC |
| Working Temprature | -10°C~50°C |
| Standby Current | ≤ 5mA |
| Dimension (L x W x H) | 111.39X90.48x40.48 mm |
Preferred Buyer From
| Location | Worldwide |
It is an intelligent addressable relay module, which can be configured with an Addressable Fire Alarm Control Panel. Each point (devices) can be given a specific ID or individual address, which allows the panel to continuously monitor a specific location (point). The module has two panel-controlled LED indicators. control modules provide the system with a dry contact output for activating a variety of auxiliary devices, such as fans, dampers, control equipment, etc.
Features- Addressable-analog communication
- Two-wire connection
- Two LEDs one is Green, which blinks in normal conditions and another one is Red which becomes steady during a fire alarm conditions.
- Remote test from Panel
